MTxRUBL Intelligent Programmable Turntable: Complete Setup & Application Tutorial for Independent Website

The MTxRUBL Motorized Turntable is a high-performance, multi-scenario solution built on mature core control logic and a stable operation framework—designed to meet the needs of 360° product display, 3D scanning, professional photography, and live streaming. Whether you’re an e-commerce seller creating product showcases, a photography studio capturing detailed shots, a 3D scanning team collecting data, or a developer building custom workflows, this turntable delivers reliable performance.

This comprehensive tutorial guides you through every critical step: unboxing inspection, power-on initialization, USB driver and mobile APP installation, multi-mode control (remote, USB, Bluetooth), and secondary development. Mastering its standard operations and extended functions will help you unlock the full potential of the turntable, ensuring efficient and precise results for your tasks.

For more models with different load capacities or sizes, explore our full collection via the in-site link: MTxRUBL Complete Turntable Series.

Unboxing Inspection & Accessory Verification

1.1 Unboxing Preparation & Safety Guidelines

Before unboxing the MTxRUBL Motorized Turntable, follow these steps to ensure safety and avoid damage:

1. Choose a Suitable Surface: Place the outer package on a flat, stable, and load-bearing surface (e.g., a solid desk or workbench). Ensure the surface has no sharp objects or debris to prevent scratches on the package or internal items.
2. Use Proper Tools: Use a utility knife or scissors to gently cut the outer packaging tape. Avoid using sharp tools (such as screwdrivers) to pry the box, as this may damage the internal protective materials or the turntable itself.
3. Handle with Care: When lifting the inner box from the outer package, hold it with both hands at the bottom to prevent it from slipping. Do not pull or drag the box, as this may cause internal accessories to shift or collide.
4. Check Package Integrity: Before opening the inner box, inspect the outer packaging for signs of severe compression, tearing, or water damage. If you find any damage, contact customer service immediately to confirm whether to proceed with unboxing.

1.2 Complete Accessories List

After opening the inner box, take out all items and check them one by one against the accessory list to confirm no parts are missing, damaged, or deformed. The standard accessory package includes:

1. 1 x MTxRUBL Motorized Turntable Main Unit: The core device, with reserved interfaces at the bottom for power supply, USB connection, and secondary development expansion—compatible with external devices such as 3D scanners.
2. 1 x Multifunctional Infrared Remote Control: Pre-paired at the factory, with an effective control range of 3–5 meters. It supports one-click switching of core functions (continuous rotation, single-step rotation, swing mode) and adjustment of rotation speed and angle, requiring no additional pairing.
3. 1 x Universal Power Adapter: Features a wide voltage design (100–240V AC) with overcurrent, overvoltage, and short-circuit protection. The DC connector features a custom design to match the turntable’s power port, preventing incorrect insertion and device damage.
4. 1 x High-Speed USB Data Cable: 1.5 meters in length, supporting the USB 2.0 transmission protocol. It serves for computer connection, parameter debugging, and data interaction during secondary development. Consequently, it ensures stable communication between the turntable and control devices.
5. 1 x Dual-Language Official Manual (English/Chinese): The manual includes detailed operation steps, troubleshooting solutions, secondary development document links, and function illustrations. This helps users of different language backgrounds get started quickly.

Device Power-On & Initial Startup

2.1 Pre-Power-On Preparation

Before powering on the turntable, complete the following preparations to ensure safe and stable operation:

1. Confirm the Power Environment: Use a standard household socket with a ground wire to avoid electric shock risks from ungrounded circuits. Do not use low-quality extension cords or multi-socket adapters, as these may cause voltage fluctuations and damage the turntable’s internal components.
2. Inspect the Power Adapter: Check the adapter’s cable for signs of damage (such as cracks, exposed wires, or fraying at the connector). If you find any damage, stop using it immediately and contact customer service for a replacement. Do not attempt to repair it yourself.
3. Clear the Turntable and Surroundings: Ensure there are no foreign objects (e.g., tools, accessories, or debris) on the turntable surface. Keep the area within 10cm of the turntable’s edge free of obstacles to prevent obstacles from blocking the turntable during initial rotation.
4. Confirm Placement Stability: Place the turntable on a horizontal surface. If necessary, use a level tool to check—uneven placement may cause eccentric rotation, affecting operation precision and reducing the service life of internal parts.

2.2 Step-by-Step Power-On Operation

Follow these steps to power on the turntable correctly and confirm its initial startup status:

1. Connect the Power Adapter: Align the DC connector of the power adapter with the dedicated power port at the bottom of the turntable (the connector has a direction mark to prevent incorrect insertion). Push the connector gently until you insert it fully. Do not force it to avoid damaging the port pins. Then plug the AC plug of the adapter into the household socket.
2. Press the Power Button: Locate the physical power button on the side of the turntable . Short press the button . After pressing, the turntable enters the pre-startup state.
3. Observe the Self-Check Process: Within 3–5 seconds after pressing the power button, the turntable will automatically perform a self-check (including inspections of the control circuit, motor, and sensors). The self-check process ensures all internal components are functioning normally. During this period, do not touch the turntable or unplug the power adapter.
4. Enter Standby Mode: After the self-check is completed, the turntable remains stationary and enters standby mode, ready to receive control commands (such as signals from the remote control, USB, or Bluetooth).

Download & Install USB Driver & Mobile APP

3.1 USB Driver Download (For Computer Connection)

The MTxRUBL turntable requires a dedicated USB driver to establish stable data communication with the computer (e.g., for parameter debugging and secondary development). Follow these steps to download the driver correctly:

1. Confirm Driver Compatibility: The driver supports Windows 7/8/10/11 systems (both 32-bit and 64-bit). It is not compatible with macOS or Linux—for non-Windows systems, use the Bluetooth APP or web-based control panel instead.
2. Download from Official Channels:Visit the MTxRUBL official independent website and navigate to the “Download Center” section. Locate the “USB Driver for Motorized Turntable” file and click the download link.
3. Verify the Driver File: After downloading, the driver is saved as a ZIP compressed package. Right-click the package, select “Properties” → “Details” to view the file version, and compare it with the latest version on the official website to ensure it is up-to-date.

3.2 Step-by-Step USB Driver Installation USB

Install the USB driver according to your Windows system version to ensure smooth communication between the computer and the turntable:

1. Unzip the Driver Package: Right-click the downloaded ZIP file and select “Extract All” to extract the files to a folder (we recommend saving it to the desktop for easy access). The extracted folder contains:
   • Setup.exe (driver installation program)
   • Driver configuration file
   • Installation guide
2. Run the Installation Program:
   • For Windows 10/11 Users: Right-click Setup.exe and select “Run as administrator” to avoid permission issues. In the pop-up installation wizard, click “Next” → accept the user license agreement → select the default installation path → click “Install”.
   • For Windows 7 Users: Before running Setup.exe, right-click the file → select “Properties” → “Compatibility” tab → check “Run this program in compatibility mode for: Windows 7” and “Run this program as an administrator” → click “Apply” and “OK”. Then double-click Setup.exe to start the installation.
3. Complete the Installation: The installation process takes 2–3 minutes. During this period, do not close the installation window or disconnect the computer from the power supply. Interruption may damage the driver files. After installation, click “Finish” and restart the computer .
4. Verify the Installation: After restarting, connect the turntable to the computer via the USB data cable (ensure the turntable is powered on and in standby mode). Open “Device Manager” → expand “Ports (COM & LPT)”. If “MTxRUBL USB Serial Port (COMx)” is displayed (x is the COM port number, e.g., COM3) without a yellow exclamation mark, the driver is installed successfully.

3.3 Mobile APP Download & Installation (For Bluetooth Control)

The MTxRUBL turntable supports wireless control via a dedicated mobile APP (compatible with Bluetooth 4.0 and above). Install the APP according to your mobile system :

1. Confirm APP Compatibility:Android: Requires Android 6.0 or above, compatible with most mainstream brands (e.g., Samsung, Xiaomi, Huawei).
2. Download the APP for Android Devices: Official Website Download: Open the mobile browser . Click the “Android Version” download link. After the download is complete, click the APK file to start the installation. If a “Unknown source app installation” prompt appears, go to “Settings” → “Security” → enable “Allow unknown source apps” for the browser.
3. Verify the APP Installation: After installation, open the APP. The APP will automatically detect the Bluetooth status:
   • If Bluetooth is not turned on: The APP will prompt “Please enable Bluetooth to connect to the turntable”. Go to the mobile phone’s system settings to turn on Bluetooth.
   • If Bluetooth is turned on: The APP will enter the “Device Search” page and display nearby MTxRUBL turntables.
   • Click the turntable name to connect. If the connection is successful, the APP will display “Connected” and enter the main control interface. If the connection fails, move the mobile phone closer to the turntable (within 2 meters) and try again.

Support for Remote Control, USB & Bluetooth Connection Control

4.1 Overview of Control Modes

The MTxRUBL turntable provides three core control modes, which can be flexibly switched according to different usage scenarios. Each mode follows a unified operation logic and supports all rotation functions :

1. Remote Control Mode: The most convenient mode for quick operation, suitable for live streaming, on-site product display, and other scenarios requiring hands-free control. It uses infrared signals, requiring no wired connections or Bluetooth pairing—simply point the remote at the turntable’s signal receiver to control.
2. USB Connection Mode: Connects to the computer via a USB cable, ideal for precise parameter debugging (e.g., setting custom rotation angles) and secondary development. It supports real-time data transmission between the computer and the turntable, enabling batch execution of control commands (e.g., automatic 360° shooting with 48 steps).
3. Bluetooth Connection Mode: Connects to the mobile phone via Bluetooth, suitable for wireless operation scenarios . The APP provides a visualized interface for setting rotation speed, angle, and pause time—no professional technical knowledge is required.

4.2 Remote Control: Key Functions & Connection Notes

The MTxRUBL remote control is factory-paired, supporting full control of the turntable’s core functions. Below is a detailed breakdown of every button and its usage notes.

1. Lock Button

• Function: When pressed, the turntable will no longer accept remote control commands until the lock button is pressed again.
• Purpose: Prevents accidental operations, especially when multiple devices are in use or after settings have been adjusted.

2. Set Origin Button

• Function: Sets the current position as the origin point (used with the “Return to Origin” button).
• Purpose: When the “Return to Origin” button is pressed, the turntable will rotate back to this position.

3. Return to Origin Button

• Function: Returns the turntable to the preset origin point (used with the “Set Origin” button).
• Purpose: When pressed, the turntable moves back to the previously set origin position.

4. Speed Adjustment Buttons (Speed Up / Speed Down)

• Speed Up:
  • Function: Increases the turntable’s rotation speed by one level.
  • Purpose: Adjusts the rotation speed, taking effect immediately.
• Speed Down:
  • Function: Decreases the turntable’s rotation speed by one level.
  • Purpose: Adjusts the rotation speed, taking effect immediately.

5. Continuous Rotation Mode Button

• Function: Switches the turntable to continuous rotation mode.
• Purpose: Changes the turntable from any other mode to continuous rotation mode, taking effect immediately.

6. Pendulum (Swing) Mode Button

• Function: Switches the turntable to pendulum (swing) mode (used with the “Set Angle” button).
• Purpose: The turntable rotates to the set angle, pauses for 4 seconds, then reverses direction. It continues alternating directions, rotating the same angle and pausing after each movement. The initial position is treated as the center of the swing.

7. Trigger Auto Focus

• Function: Manually controls the turntable to output an auto-focus signal via the shutter cable interface (triggering a DSLR camera to focus).
• Purpose: Allows users to manually override to force auto-focus at any time.

8. Trigger Shutter for Photo Capture

• Function: Manually controls the turntable to output a shutter signal via the shutter cable interface or Bluetooth (triggering a camera shutter or sending a signal to a mobile phone camera, depending on the turntable’s support).
• Purpose: Enables manual override to force a shutter signal for photo capture at any time.

9. Trigger Auto Focus + Shutter

• Function: Manually controls the turntable to output both focus and shutter signals simultaneously (Bluetooth functionality depends on the turntable model).
• Purpose: Allows users to manually override to force auto-focus and trigger the shutter for photo capture at any time.

10. Save Button

• Function: Saves the current settings to the turntable’s flash memory.
• Purpose: On the next startup, the turntable will operate according to the saved direction, angle, speed, and mode.

11. Set Angle Buttons

• Function: Specifies the angle for a single rotation. For example, setting it to “90” means the turntable will rotate 90 degrees per step.
• Purpose: Supports 3 operation types:
  1. Single-Step Mode: Rotates the specified angle and stops.
  2. Step Mode: Rotates the specified angle, pauses, then repeats the cycle.
  3. Pendulum/Swing Mode: Oscillates within the specified range until interrupted.

12. Reserved Button

• Function: Reserved, currently undefined.
• Purpose: None.

13. Direction Control Buttons

• Clockwise:
  • Function: Switches the turntable’s rotation direction to clockwise.
  • Purpose: Adjusts the rotation direction, taking effect immediately.
• Counterclockwise:
  • Function: Switches the turntable’s rotation direction to counterclockwise.
  • Purpose: Adjusts the rotation direction, taking effect immediately.

14. Start/Stop Button

• Function: Starts or stops the turntable’s rotation.
• Purpose: If the turntable is stopped, pressing it starts rotation; if it is rotating, pressing it stops rotation. The turntable toggles between states with each press.

15. Repeated Step Mode Button

• Function: Switches the turntable to repeated step mode (used with the “Set Angle” button).
• Purpose: The turntable rotates the set angle, pauses for 4 seconds, then repeats the cycle indefinitely.

16. Multi-step Within One Circle Mode Button

• Function: Quickly configures the turntable to complete a full 360° rotation in a rotate-and-pause manner. Each step rotates the turntable by 360°/N degrees (where “N” corresponds to the number on the button). The default pause time is 4 seconds unless modified.
• Purpose: For photo capture, the turntable rotates the specified angle, pauses for 4 seconds to capture the frame, then continues to the next position. This repeats until a full 360° rotation is complete, then returns to the starting position.

4.3 Computer USB Software Control (TurntableX)

The MTxRUBL turntable supports control via the official TurntableX software (V1.5.2 and above), designed for precise parameter setting, batch shooting, and secondary development debugging. The software provides both basic and advanced control modes to meet different user needs.

1. Software Download & Installation

• Visit the official website’s “Download Center” and download the latest version of TurntableX .
• Double-click the installation package to complete the setup. The software requires no additional runtime libraries and can be launched directly from the desktop shortcut after installation.

2. Connection Between Turntable and Computer

• Physical Connection: Use the included USB cable to connect the turntable to your computer. The turntable must be powered on and in standby mode.
• COM Port Selection: In the software’s top-left corner, select the corresponding COM port from the drop-down menu. The baud rate is fixed at 115200 (no need to change).
• Connect: Click the “Connect” button. When the connection status changes to “Connected”, the turntable and computer are successfully linked.

3. Software Interface & Core Functions

The TurntableX software is divided into multiple functional areas for clear operation:

• Device Info Area: Displays the turntable’s device ID, firmware version, and connection status, useful for verification and troubleshooting.
• Current Configuration Area: Displays real-time parameters: rotation direction (left/right), angle per step, pause time, and total steps. Click “Refresh” to sync the latest settings from the turntable.
• Shortcut Control Area:
• Rotation Mode Settings: Set parameters for continuous rotation, step rotation, or swing mode. Adjust angle, pause time, and repeat cycles, then use the function buttons to start.
• Repeated Step Shortcuts: Quick access to common step counts (4/8/10/12/16/20/24/32/36/40/48/60/72/100/120) for one-click setup of multi-step shooting.
• Function Operation Area:
• Basic controls: Set Origin, Return to Origin, Accelerate/Decelerate, Left/Right Rotation, Stop.
• Camera controls (supported by shutter-compatible models): Focus, Shutter, Focus + Shutter.
• Advanced options: Screen remote (lock infrared control), mute, save settings.
• Test Command Console (For Secondary Development):
• Advanced users can enter custom CT commands to control the turntable or combine commands to implement complex workflows.
• The “Send” button executes the command, and the “Receive” area displays the turntable’s real-time feedback for monitoring and debugging.

4.4 Mobile Bluetooth APP Control (TurnTableBle)

The TurnTableBle mobile APP features a user-friendly interface for wireless control, making it suitable for on-site operation and quick parameter adjustment. Master the following functions to use the APP efficiently:

APP Main Interface Layout (After Connection)

• Top Mode Selection: Four operation modes: Continuous, Pause, Swing, Command.
• Configuration Parameters Area (Left): Set core parameters for each mode:
  • Angle (degrees): Step rotation angle (0.1°–360°).
  • Equivalent circle: Total rotation cycles.
  • Pause time (seconds): Pause duration between steps (0–60 seconds).
  • Repeat times: Number of operation cycles.
  • Auto shutter: Enable/disable automatic camera triggering (supported by shutter-compatible models).
  • Disable IR: Lock infrared remote control to prevent accidental operations.
  • Mute: Disable audio prompts.
• Function Operation Area (Right):
  • Quick controls: Set Origin, Return to Origin, Save Settings.
  • Camera controls: Focus, Shutter, Focus + Shutter (supported by shutter-compatible models).
  • Manual controls: Speed Up/Down, Left/Right Rotation, Stop.
• Bottom Log Area: Displays real-time device feedback, heartbeat signals, and event logs for monitoring and debugging.
• Advanced Settings: Enable/disable heartbeat, feedback, and event notifications; clear logs; send custom commands.

Secondary Development Support

The MTxRUBL turntable is designed with openness in mind, supporting secondary development by developers to meet custom application scenarios. Its core development capabilities include:

1. Multi-Interface Support: Provides USB serial port and Bluetooth BLE interfaces for data interaction, compatible with most development platforms .
2. Unified Command Protocol: Uses a standard text-based control command set , which is easy to parse and execute—no need for complex binary protocol development.
3. Rich Development Resources: Official provides:
   • Detailed command list .
   • Source code demos for multiple platforms.
   • Development documentation.
4. Compatibility with Third-Party Software: Supports integration with common software tools — developers can use familiar programming languages and frameworks for development.

Secondary development is suitable for scenarios such as:

• Automatic 3D scanning: Connect the turntable to 3D scanning software, and control the turntable’s rotation speed and angle via custom code to synchronize with the scanner’s sampling frequency.
• Intelligent production line: Integrate the turntable into the production line, and use PLC or industrial computers to send commands to control the turntable’s rotation, realizing automated product testing or labeling.
• Customized shooting systems: Develop a dedicated shooting software that links the turntable with cameras, lights, and other equipment to achieve fully automated product photography workflows.

Application Scenarios

The MTxRUBL motorized turntable, with its stable performance, multi-dimensional control methods and strong expandability, is widely used in various fields, covering commercial display, professional shooting, technical development and other scenarios, and can meet the diverse needs of different users. The specific application scenarios are as follows:

• Cross-border E-commerce Product Display: It is suitable for e-commerce sellers to shoot 360° product display videos and pictures, allowing consumers to view the product from all angles, improving the display effect of the product and enhancing the consumer’s purchasing desire. It can be used for various types of products, such as electronic products, handicrafts, cosmetics, daily necessities, etc.
• Commercial Photography: It is widely used in commercial photography studios for product shooting, advertising shooting and other scenarios. It can realize precise rotation control, ensure the consistency of shooting angles, improve shooting efficiency and shooting quality, and meet the professional shooting needs of photographers.
• 3D Scanning: It is matched with 3D scanning equipment to realize 360° scanning of objects. The turntable rotates stably and the speed is adjustable, which can ensure the accuracy of scanning data and provide high-quality data support for 3D modeling, reverse engineering and other work.
• Live Streaming Display: It is suitable for live streaming scenarios such as e-commerce live streaming and product promotion live streaming. The host can control the turntable through the remote control or mobile phone APP to display the product from multiple angles in real time, enhance the interaction with the audience, and improve the live streaming effect.
• Commercial Exhibition: It is used in shopping malls, exhibition halls and other places for product display. The turntable can continuously rotate or swing to attract the attention of visitors, highlight the characteristics of the product, and improve the display effect of the exhibition.
• Technical Development: It is used by technical development teams for secondary development and project integration, and can be applied to intelligent control systems, automated production lines, scientific research experiments and other fields to provide stable and reliable rotating platform support.

The MTxRUBL motorized turntable is an intelligent rotating device with stable performance, complete functions and strong expandability. This official application tutorial has comprehensively and detailedly introduced the unboxing, power-on, driver and APP installation, control methods, secondary development and application scenarios of the turntable, and explained the detailed operation steps of each function in detail. It is hoped that this tutorial can help you quickly master the use method of the MTxRUBL turntable and give full play to the performance of the equipment.

If you encounter any problems during use, you can refer to the official manual or contact the official after-sales team for help. We will provide you with professional technical support and after-sales service to ensure that you can use the equipment smoothly. At the same time, we will continue to optimize the product function and update the tutorial content to bring you a better user experience.

Thank you for choosing MTxRUBL motorized turntable. We look forward to your feedback and suggestions, and we will continue to improve and grow to provide you with more high-quality products and services.