Programmable Motorized Turntable MTxRUWPSL Series Practical Operation Tutorial

Introduction: What Is MTxRUWPSL Programmable Motorized Photography Turntable

The MTxRUWPSL series programmable motorized turntable has become a popular choice for 360° product photography, object 3D scanning, artifact digitization, and commercial live streaming displays. Notably, it features built-in USB and WiFi communication interfaces alongside an integrated auto-shutter trigger function. Furthermore, this series supports secondary development through a unified CT command set, making it highly adaptable for technical users. With multiple turntable diameter options available, the lineup can accommodate everything from lightweight small goods to heavier industrial samples. Users can control the rotation via infrared remote controller, mobile App, or PC software, which ensures flexibility for both regular commercial shooters and developers. For more details, you can browse the full lineup on the [MTxRUWPSL programmable turntable series page] to select the right size for your specific shooting scenarios.

1. Pre-operation Preparation Before Power On

First, check the complete package components: main turntable body, power adapter, USB data cable, infrared remote control. Confirm the load weight of your object matches the load specification of your MTxRUWPSL model. Do not place items with overhanging edges without torque assessment, long-term overload will accelerate mechanical wear. Place the turntable on flat, stable ground, avoid uneven surfaces that cause vibration during rotation.

If you plan to use auto shooting function, prepare matched accessories in advance: SLR camera shutter cable for DSLR shooting, or use mobile phone Bluetooth pairing for smartphone capture.

2. Three Connection Modes & Connection Steps

2.1 Infrared Remote Control Connection (Quick Use for General Shooting)

After powering on the turntable, the infrared receiving module works immediately, so no extra wiring or network configuration is required. Consequently, you can directly switch rotation modes and adjust rotating speed and direction. However, one limitation you should know is that the infrared remote cannot modify pause duration or advanced shutter timing parameters. Therefore, you will need to adjust these advanced settings via PC software or the mobile App beforehand.

2.2 USB Wired Connection (Stable Control for 3D Scanning & Precise Shooting)

First, install the CH340 serial driver on your Windows computer. Then, link your PC and turntable using the USB data cable. After that, open the control software and select the corresponding COM port to finish the connection. Because USB wired connection delivers a stable signal with low delay, it is the preferred solution for long-time automatic shooting and 3D scanning work. Please note that one serial port can only be occupied by one control program at the same time.

2.3 WiFi Wireless Connection (Wireless Remote Operation)

The MTxRUWPSL turntable creates a built-in hotspot after power-on. To use this mode, connect your laptop or mobile phone to this turntable hotspot (default password is 88889999). Keep in mind that this WiFi network is a point-to-point local network, so it cannot access the external internet. Once the connection is successful, launch the control software to send rotation commands. This wireless mode is particularly suitable for scenarios where you need to reserve space around the turntable for lighting equipment.

3. Introduction to Five Core Rotation Modes for Shooting Workflow

All MTxRUWPSL turntables support five built-in rotation modes. Therefore, you should select the proper mode based on your shooting target.

• Multi-step Within One Circle Mode: This is the most commonly used mode for 360° product photography. Specifically, the turntable evenly divides 360 degrees, rotates segment by segment with pauses, and automatically stops after finishing one full circle. When you match this mode with the auto-shutter function, you can complete batch 360° image capturing automatically.
• Continuous Rotation Mode: This mode is used for live streaming display, as the turntable rotates at a fixed speed continuously until manually stopped.
• Single-Step Mode: In this mode, the turntable rotates a designated angle once and then stops. It is suitable for manual multi-angle photo capture.
• Repeated Step Mode: Here, the turntable rotates a specific angle, pauses, and then repeats the cycle continuously. This mode is widely used for small-batch sequential shooting tasks.
• Pendulum Swing Mode: This mode makes the turntable reciprocate back and forth around the origin position. It is ideal for short video swing shooting.

4. Auto Shutter Automatic Shooting Operation Guide

The MTxRUWPSL model with PS marking supports integrated auto shutter trigger. Two shooting trigger options are available.

Option 1: DSLR Camera Shooting. Connect turntable 3.5mm port to your camera via dedicated shutter cable. When the turntable stays in pause status, it will output shutter signal at preset time point to trigger camera capture.

Option 2: Smartphone Shooting. Turn on mobile Bluetooth, pair with device named ComXimShutter. The turntable will send Bluetooth shutter signal to take photos on your phone automatically.

Practical tip: The default setting triggers the shutter at the second second during the pause. However, you can adjust the pause duration and shutter timing through PC software to adapt to different camera focusing response speeds. Bear in mind that the infrared remote cannot adjust these timing parameters.

5. Origin Calibration Function Practical Usage

Origin setting is a frequently overlooked but highly practical function for standardized shooting. To use it, follow these steps: First, rotate the turntable to your standard starting shooting position. Then, execute the “Set Origin” command. Later, when you need to return to the starting position, simply activate the “Return to Origin” function. As a result, the turntable will select the shortest rotating path to go back to the preset origin point. This function ensures a unified starting position for every batch of shooting, which greatly improves consistency.

6. Secondary Development Basic Workflow for Developers

For developers who need customized control system, all MTxRUWPSL turntables adopt unified CT command set. You can control rotation parameters and shutter trigger via USB or WiFi. If you want to learn more about development compatibility of the whole product line, check our technical explanation page for the 【Intelligent Programmable Turntable User Manual】

Step 1: Obtain official control command document and demo source code.

Step 2: Run demo program to test basic turntable command.

Step 3: Reference demo code to integrate turntable control into your own software or script.

Step 4: Send CT commands to control rotation angle, speed, operation mode and shutter output.

Typical command example: CT+TURNSINGLE(1,11.25); This command orders the turntable to rotate clockwise 11.25 degrees and stop.

7. Common Troubleshooting & Practical Experience Sharing

1. Connection failure over USB: First, Verify CH340 driver installation status, check whether the COM port is occupied by other software, replace USB cable for testing.
2. Cannot connect turntable WiFi: First, Confirm you connect to turntable local hotspot, not home router WiFi. Remember the default hotspot password 88889999.
3. Auto shutter does not trigger:On one hand,  Check shutter cable connection status or Bluetooth pairing state. Confirm your MTxRUWPSL model supports PS shutter function.
4. Vibration during rotation: First, Confirm the load is within rated range, place the turntable on flat surface, avoid unbalanced eccentric loading.
5. App compatibility reminder: The official demo software fully supports Windows and Android. However, an iOS native App is not currently available. Moreover, some Android mobile models may have Bluetooth compatibility issues.