Introduction to ComXim NTxRJL series electric turntable

Introduction to ComXim NTxRJL series electric turntable

Mushroom-shaped appearance: This series of turntables are mushroom-shaped, large at the top and small at the bottom.
Power supply method: Use USB Type-C 5 plug-in, and the data cable has a wide range of use
Color: Black/white are available
Size/load-bearing capacity: 13, 15, 18, 20, 25, 30cm diameters are available; the 18cm diameter turntable consists of a 13cm base + a separate 18cm cover; the 30cm diameter turntable consists of a 20cm base + a separate 30cm cover. This series of turntables weighs 5kg~15kg.
Price: The retail price varies according to the size. Wholesale adopts a ladder quotation, and the price varies depending on the purchase quantity.

Remote control instructions

Steps to use the turntable

Connect one end of the USB Type-C cable to the mobile phone charger and plug it into the socket, and connect the other end to the turntable;
Turn the turntable switch;
Place the display items on the turntable and you can see that the turntable starts to rotate
The remote control can switch speed and direction; control start and stop; save the set parameters. The higher the speed, the more obvious the turntable rotates.

Usage scenarios

Product display: The turntable can be used to display various ornaments and models. A classic usage scenario is to put the turntable in a transparent gift box. The gift can be a cake or something else. Driven by the turntable, the gift rotates in the box and can be controlled by remote control, giving people a very good ritual feeling.

2.Product photography: Put the items to be photographed on the turntable and rotate them. Fixed the camera position, you can easily shoot product videos in 360 degrees, which makes your shooting easy. The doubt is to put the turntable in an automatic imaging studio, put the display items on the turntable, and you can automatically generate a 360-degree rotating video, and easily make Amazon 360°View promotional videos.

Precautions

The turntable is an electrical appliance, not waterproof or heat-resistant. The turntable is driven by a motor, and the sound is normal between 40 and 60 decibels.
To extend the service life of the turntable, it is recommended to stop and rest for 2 hours after 6 to 8 hours of continuous work.
If the turntable cannot rotate: first check whether the turntable is powered on, whether the power cord is plugged in tightly, and whether the switch is turned on; you can increase the speed to the maximum, put an object on the turntable to observe whether it rotates.
The turntable is a disposable plastic-sealed product. To ensure user safety, it is prohibited to modify or repair the product privately. If you disassemble the product, we will not be responsible for any after-sales problems. If you have any questions, please contact us.
Load statement: The load marked on the turntable means: the display items must be within the turntable diameter range. If the turntable diameter and load are exceeded, the turntable’s load-bearing capacity will be reduced, the motor and other structures will be damaged, and the normal operation of the turntable will be affected.
When using the remote control, please remove the insulation on the back of the remote control so that the remote control can be powered on and used normally; please note that the effective control distance of the infrared remote control is within 5 meters. When using it, please aim at the infrared receiver next to the switch.