Beginner Complete Operation Tutorial for MTxRUWLPro Programmable Motorized Turntable

[Link to MTxRUWLPro Programmable Motorized Turntable]

Core Introduction Points

1. First of all, this tutorial serves all new users of programmable rotating display stand.
2. Meanwhile, we split every single operation into detailed, actionable steps.
3. Furthermore, this turntable provides three mature control channels for different scenarios.
4. Besides, ordinary users can finish all operations without professional coding ability.
5. In addition, developers can access custom control solutions via internal link to CT command list.
6. Lastly, all preset rotation modes perfectly match product photography and 3D scanning work.

Chapter 1 Unboxing & Standard Parts Check

Step 1 Take Out All Packed Items

1. To start with, lay a soft cloth flat on your desktop to guard the motorized turntable surface.
2. Next, unfold all carton flaps slowly to avoid scratching internal accessories.
3. Then, take every component out one by one and place them on the clean flat surface.

Step 2 Verify Complete Accessories

1. First, pick up the paper manual and find the packing list printed on its front cover.
2. After that, count each item strictly against the standard list one by one.
3. In total, the full set contains five independent standard components: ① Programmable motorized turntable main body ② Matching DC power adapter ③ Infrared remote controller ④ USB data transmission cable ⑤ Printed paper user manual
4. Immediately contact your seller once you find any missing accessory.

Step 3 Temporary Storage Tips

1. For one thing, keep the original carton intact for future storage or long-distance transport.
2. For another, put the user manual in an easy-to-reach drawer for quick parameter lookup later.
3. Finally, wind up loose cables neatly to prevent messy tangles in daily use.

Chapter 2 Basic Power Boot Process

Step 1 Complete Power Wiring

1. First, locate the dedicated DC jack on the turntable’s side plastic shell.
2. Next, insert the small DC plug of the adapter fully into the reserved power port.
3. Then, plug the AC large head of the adapter into a standard household wall socket.

Step 2 Finish Device Startup

1. To begin, toggle the physical power switch on the turntable to the ON position.
2. Afterwards, wait exactly 5 seconds for the built-in hardware to finish initialization.
3. Once initialization completes, the turntable stays in static standby mode.
4. At this point, you can freely select any control channel to run the turntable.

Chapter 3 Mode 1 Infrared Remote Control

3.1 Remote Preparations

1. First off, prepare two AAA dry batteries for powering the infrared remote.
2. Then, flip open the battery cover on the back of the remote controller.
3. Next, install batteries strictly following the positive and negative marks inside the compartment.
4. Lastly, snap the battery cover tightly to avoid accidental power cuts during operation.

3.2 Basic Rotation Adjustment Keys

1. To begin with, aim the remote’s infrared transmitter straight at the turntable receiving window.
2. After that, tap the Speed Up key to shorten the time cost of each full rotation.
3. Conversely, tap the Speed Down key to extend the time needed for one full circle.
4. Meanwhile, press the Clockwise button to switch the turntable’s rightward rotation direction.
5. On the contrary, hit the Counter-clockwise button to activate leftward spinning.

3.3 Five Core Rotation Mode Operations

1. Single Step Mode

1. First, pick any single angle button like 1°, 18°, or 90° on the remote panel.
2. Then, press the selected angle key once to trigger the single-step action.
3. After rotation finishes the fixed angle, the turntable will stop automatically.

2. Repeated Step Mode

1. First, press your target angle key to set the single rotation range.
2. Next, locate the Repeat Step button on the remote and press it subsequently.
3. From then on, the turntable will keep cyclic intermittent rotation until you hit Stop.

3. Pendulum Swing Mode

1. First, choose the swing angle that fits your shooting demand.
2. Afterward, press the Pendulum key right after the angle selection.
3. As a result, the turntable starts stable back-and-forth swing around the current center point.

4. Multi-step Within One Circle Mode

1. First, directly tap any numeric key ranging from 2 to 144 on the remote.
2. Then, the turntable will split the full 360 degrees into equal segments automatically.
3. In the meantime, the device pauses for a fixed interval after each segmented rotation.

5. Continuous Rotation Mode

1. First, find the Continuous key on the lower area of the remote.
2. Then, press this key once to launch endless steady spinning motion.
3. Whenever you need a pause, simply tap the Stop button to halt all rotation instantly.

3.4 Auxiliary Function Buttons

1. First, use the Set Origin button to save the current position as zero benchmark.
2. Later, press Return to Origin if you need the turntable to go back to the zero point.
3. Besides, hit Save to write all modified rotation parameters into turntable flash memory.
4. Moreover, activate the Lock button to avoid wrong accidental presses during long shooting sessions.

Chapter 4 Mode 2 USB Wired Control via TurntableX Windows Software

4.1 Pre-install USB Serial Driver

1. To start with, open your browser and visit the official ComXim website.
2. Next, find the download page and grab the CH340 USB-to-serial driver compressed file.
3. Afterwards, unzip the driver folder and place all files on your desktop for easy access.
4. Then, run the installer program and click the Install button to complete deployment.
5. Finally, restart your computer to fully activate the newly installed driver files.

4.2 Hardware Connection Setup

1. First, take the matching USB data cable out of your accessory package.
2. Next, plug one cable end into the turntable USB port and the other into your PC.
3. Meanwhile, keep the turntable powered on throughout the whole connection process.
4. After wiring finishes, open Windows Device Manager to check the assigned COM port number.

4.3 TurntableX Software Connection Steps

1. First, return to ComXim official resource page and download TurntableX compressed package.
2. Then, extract all program files and find the TurntableX.exe main executable file.
3. Before launching the software, double-check that the USB cable stays well connected.
4. Afterwards, open the software and locate the COM port dropdown box on the top bar.
5. Next, select the COM port number you saw inside Device Manager just now.
6. Then, click the Connect button to build stable serial communication between PC and turntable.
7. At last, read the unique device EBC code to confirm the connection works normally.

4.4 Advanced Adjustable Parameters

1. First, modify the pause interval value which the infrared remote cannot edit at all.
2. Next, input custom repeat times to design exclusive automatic shooting cycles.
3. In addition, enter independent CT commands inside the software built-in debug panel.
4. Furthermore, adjust the minimum command response delay according to your development needs.

Chapter 5 Mode 3 Wi-Fi Wireless Control

5.1 Connect Turntable Built-in Hotspot

1. First, power on the turntable and wait 10 seconds for its Wi-Fi hotspot to broadcast signals.
2. Meanwhile, open the Wi-Fi setting panel on your computer or Android mobile phone.
3. Then, scroll the network list to search the SSID named after your exact turntable model.
4. After finding the hotspot, select it and input the default password 88889999 for pairing.
5. In addition, ignore the system “no internet access” pop-up prompt without hesitation.
6. In fact, this exclusive hotspot only transmits control signals instead of network data.

5.2 Windows TurntableX Wi-Fi Operation

1. First, keep your computer connected to the turntable private Wi-Fi hotspot all the time.
2. Next, launch the TurntableX software program you installed earlier.
3. Afterwards, switch the software connection mode from COM serial to IPv4 wireless type.
4. Then, retain the default fixed IP 192.168.181.181 without any manual edits.
5. Finally, tap the Connect button to finish the whole wireless control linkage process.

5.3 Android Mobile App Control

1. First, download the TurntablePlus APK file from ComXim official demo resource library.
2. Next, transfer the APK file to your Android smartphone via USB cable or cloud storage.
3. Afterwards, install the App package and grant all required device access permissions.
4. Before opening the App, reconnect your phone to the turntable Wi-Fi hotspot again.
5. Then, launch TurntablePlus and fill in the unchangeable fixed IP inside the input box.
6. At last, click the Connect button and adjust all rotation parameters on the touch screen freely.

Chapter 6 Secondary Development CT Command Usage Guide

6.1 Basic Development Premise

1. First of all, this whole MTxRUWLPro series supports a unified universal CT command system.
2. Moreover, USB, Bluetooth and Wi-Fi channels transmit exactly the same set of command codes.
3. Besides, click our internal link to browse the complete CT command list for full reference.

6.2 Simple Command Operation Logic

1. First, write your target control instruction following the official standard format strictly.
2. Afterwards, send the compiled command data through your chosen communication channel.
3. Then, the turntable hardware will execute corresponding rotation actions right away.
4. In the meantime, the device returns real-time feedback signals back to your control terminal.
5. Lastly, read the event feedback prompts to track the progress of your automatic rotation task.

Chapter 7 Common Simple Troubleshooting

1. Remote sends signals, turntable has zero response

1. First, open the remote battery cover and check battery installation status carefully.
2. Next, re-align the remote infrared head directly toward the turntable receiving window.
3. If issues remain, replace a brand-new pair of AAA batteries for another test.

2. TurntableX software cannot detect valid COM port

1. First, uninstall the old CH340 driver and download a fresh installation package.
2. Afterwards, reinstall the driver program and restart your desktop or laptop computer.
3. In addition, swap a brand intact USB data cable and redo the whole wiring operation.

3. Turntable Wi-Fi hotspot fails to show on device network list

1. First, cut off the turntable power supply and restart the entire machine completely.
2. Next, close the Wi-Fi switch on your phone or PC and enable it again for re-scanning.
3. Meanwhile, move your device closer to the turntable to eliminate weak signal interference.

For full scene application and parameter matching, view [Link to MTxRUWLPro Programmable Motorized Turntable]