MTxRLPro Electric Turntable Complete Beginner’s Guide | Full-Scenario Operation Manual for 3D Scanning & Product Display

Unpacking Check and Preparation for First Use

1.1 Unpacking Item Check

First of all, before you start using the MTxRLPro electric turntable, first check the contents of the box to ensure all accessories are complete. The package includes: 1 electric turntable main unit, 1 power adapter, 1 infrared remote control, and 1 user manual. In case that any part is missing or damaged, contact customer service for replacement in time. Furthermore, this motorized rotating display stand matches all mainstream shooting equipment for product photography and 3D scanning.

1.2 Hardware Connection and Boot Preparation

• Step 1: Place the electric turntable on flat, solid and tilt-free ground;
• Step 2: Insert the original power adapter into the DC jack at the back of the rotating platform;
• Step 3: Plug the adapter into standard grounded mains socket.
• Once powered up, the turntable automatically enters factory default continuous rotation mode. Meanwhile,Keep the surrounding area clear of debris to prevent jamming of this photography turntable.

1.3 Product Placement Basic Rules

• Step 1: Wipe the panel surface with dry soft cloth to remove dust and particles;
• Step 2: Put goods at the central zone of the display turntable;
• Step 3: Balance the weight evenly, avoid heavy items stacked on single edge.
• Otherwise, uneven load reduces positioning accuracy of motorized turntable display and affects the shooting effect of 3d scanning turntable.

Step-by-step Operation of All Remote Control Buttons

2.1 Lock Button (Lock / Unlock)

• Step 1: Short press Lock once, all remote keys lock, the 360 degree rotating turntable ignores all remote signals;
• Step 2: Short press Lock a second time to unlock all functions.
• Specifically, lock the remote after setting parameters during shooting to avoid accidental touch interrupting live display or 3D scanning.

2.2 Save Parameter Storage Button

• Step 1: Adjust speed, direction, angle and working mode of the electric turntable to your needed state;
• Step 2: Short press Save to permanently store the full set parameters.
• As a result, after power off and restart, the rotating display pedestal automatically loads saved configurations without repeated adjustment. For better efficiency, separate storage for photography and scanning parameters is recommended.

2.3 Set Origin / Return to Origin Buttons

• Step 1: Adjust the motorized lazy susan to your fixed benchmark position via remote control;
• Step 2: Short press Set Origin to record current spot as origin reference;
• Step 3: At any rotating state, short press Return to Origin, and the rotating platform will automatically turn back to the preset benchmark position.
• Above all, this positioning function is essential for batch 3D scanning turntable work.

2.4 Speed Up / Speed Down Buttons

• Subsequently, short press Speed Up once to upgrade rotation speed by one gear instantly;
• short press Speed Down once to downgrade speed by one gear instantly.In view of load differences, for heavy goods on large rotating display stand, select lower gears for stable operation;
• on the contrary, light small products for live rotating product display can adopt higher speed gears.

2.5 Clockwise / Counterclockwise Direction Buttons

• Furthermore, short press Clockwise button, the electric rotating platform rotates clockwise;
• short press Counterclockwise button to switch counterclockwise rotation.
• Notably, direction switching takes effect immediately under all running modes.
• Besides, alternate two directions when shooting symmetrical products to enrich footage of spinning display base.

2.6 Angle Setting Buttons 0.1°~360°

Next up are angle setting buttons,Angle buttons cover 0.1°,1°,5°,10°,12°,15°,18°,36°,45°,90°,180°,360°, all core values for single-step, pendulum and repeated step mode. Once you finish selecting, after selecting angle value and corresponding mode key, the turntable starts rotation automatically without extra operation. For instance, tiny angles 0.1°–5° match high-precision 3D scanning turntable; large angles 90°/180° fit quick product detail display.

Step-by-step Operation of Five Rotation Modes

3.1 Continuous Rotation Mode

1. Factory default mode: power on the turntable, it enters continuous circular rotation automatically with no button operation required.
2. In addition, mode switching method: if running under single-step, pendulum, repeated step or multi equal division mode, directly press continuous rotation key to switch instantly, the turntable keeps circulating rotation.
3. As for application, Applicable scenes: live streaming commodity display, long-time product video shooting, cycle exhibition display.

3.2 Single-step Mode

Next comes Single‑step Mode, Step-by-step operation:

1. Directly tap any angle value button on the infrared remote control;
2. The photography turntable automatically rotates the set fixed angle and stops completely after one rotation;
3. In short, functional feature: each angle trigger only executes one rotation without cycle movement, ideal for frame-by-frame shooting and fixed-angle live detail introduction.

3.3 Pendulum Swing Mode

Subsequently, we move to Pendulum Swing Mode,Complete operation steps:

1. Manually adjust goods to the central position you want for swing movement;
2. Select the required swing angle via angle keys;
3. Short press pendulum mode button, the rotating platform starts reciprocating swing immediately;
4. Meanwhile,Movement logic: rotate forward to set angle, pause fixed 4 seconds, reverse back to swing center, repeat the loop continuously. Bear in mind that, the position when pressing pendulum key is confirmed as swing midpoint.

3.4 Repeated Step Mode

After that is Repeated Step Mode,Step-by-step operation guide:

1. Select target single rotation angle with angle buttons;
2. Short press repeated step mode key, the turntable runs circular intermittent movement automatically;
3. According to its cycle rule: rotate the set angle → pause 4 seconds → repeat rotation and pause infinitely. Therefore, this mode is widely used for batch interval shooting with 360 photography turntable.

3.5 Multi-step Within One Circle Mode

Last but not least,Detailed operation steps:

1. Optional pre-operation: short press Set Origin to lock unified scanning starting point;
2. Directly press equal division digital key (2/4/8/16/36 etc.);
3. In terms of operating logic: the equipment equally divides 360°, rotates one segment angle and pauses 4 seconds each time, and automatically stops after finishing one full circle without manual intervention. This professional mode matches full-circle collection of 3d scanning turntable.

Point-by-point Notes for Safe Use & Maintenance

4.1 Load Bearing Specifications

1. Never place goods exceeding the rated load of motorized turntable display, because long-term overload damages internal transmission gear and loses positioning precision.
2. All items on rotating display base must keep gravity centered, otherwise eccentric weight leads to jitter during rotation and blurry shooting images.
3. Furthermore, when using single-step, pendulum and multi equal division high-precision modes for 3d scan turntable, properly reduce the weight of placed items for stable positioning.

4.2 Power Adapter Requirements

1. Only use the original matched power adapter supplied with electric turntable, non-matching third-party power supply causes unstable rotation speed and signal failure.
2. Do not pull power cord violently; avoid long-term sharp bending of DC wire to prevent internal wire fracture and poor contact.
3. Cut off power supply when motorized rotating display stand is idle over 30 minutes to save energy and extend equipment service life.

4.3 Infrared Remote Control Taboos

1. Align remote infrared transmitter with the receiving window on turntable panel; any shelter between remote and turntable causes rotating platform signal failure.
2. Keep remote away from liquid, heavy dust and high temperature environment to avoid key failure and short circuit of internal circuit board.
3. After adjusting all parameters for photography turntable, activate Lock function to eliminate misoperation risk during shooting.

4.4 Environment Placement & Cleaning Maintenance

1. Place display turntable in dry indoor space, avoid long-time continuous work in humid and dusty workshop environment.
2. Only wipe panel surface with dry soft cloth, do not spray water or corrosive detergent directly onto motorized lazy susan.
3. Do not put rotating platform close to strong magnetic equipment, magnetic interference disturbs motor control signal and leads to abnormal rotation speed.

4.5 Forbidden Operations for Mode Switch & Running State

1. Do not switch different working modes while motorized rotary table is rotating; wait for the turntable to stop automatically then switch mode to avoid impact damage to drive components.
2. Never twist the turntable panel by hand when power is connected, manual forced rotation will crack internal gear parts and cause permanent equipment failure.
3. If 360 rotating turntable appears abnormal jitter or stuck rotation, cut off power supply immediately and check whether foreign objects are jammed in the gap between base and panel.

4.6 Storage Rules for Long-term Idle State

1. If rotating display stand will not be used for several days, clear all goods from panel, wipe clean and disconnect power supply completely.
2. Store turntable and remote control in ventilated cool storage area, avoid long-term direct sunlight which ages shell and internal electronic components.
3. Separate power adapter for storage, prevent wire winding friction and outer insulation damage leading to electric leakage risk.