ComXim Programmable Turntable Quick Selection Guide
Introduction
With a product line ranging from 200mm to 800mm in diameter, load capacities from 20kg to 300kg, and connectivity options including USB, Wi‑Fi, and Bluetooth, choosing the right ComXim programmable turntable can feel overwhelming. This guide simplifies the process into four straightforward steps, helping you identify the perfect model for your application—whether you are an e‑commerce photographer, a 3D scanning professional, or an industrial automation engineer.
Step 1: Decode the Model Number
Every ComXim turntable model number embeds critical specifications. Once you understand the naming convention, you can read a model like an engineer’s shorthand.
Take MT400RUWPSL100ProV6 as an example:
| Segment | Meaning | In This Model |
|---|---|---|
| MT | Series (form factor) | MT series (circular platter) |
| 400 | Platter diameter (mm) | 400 mm |
| R | Infrared remote control | Yes |
| U | USB interface (CH340) | Yes |
| W | Wi‑Fi (AP mode) | Yes |
| PS | Phone Shutter + Camera Shutter | Yes |
| L | Load capacity indicator | Step‑mode capacity |
| 100 | Load value (kg) | 100 kg |
| ProV6 | Product version | V6 hardware revision |
Function Letter Quick Reference
| Letter | Meaning | Function | Availability |
|---|---|---|---|
| R | Remote | Infrared remote control | All models |
| U | USB | USB virtual COM port (CH340) | All models (except basic) |
| W | Wi‑Fi | 2.4 GHz AP mode direct connection | Select models |
| B | Bluetooth | BLE 4.0 wireless control | Select models |
| S | Shutter | Wired camera shutter sync (3.5mm jack) | Select models |
| PS | Phone Shutter | Bluetooth wireless shutter for smartphones + camera shutter | Select models |
| L | Load | Followed by load number (step‑mode capacity) | All models |
| Y | Y‑Zero | Hardware zero‑mark detection for absolute positioning | UT500 series only |
| T | Weight | Built‑in load cell (±0.25 kg accuracy) | UT500 series only |
Important Notes:
- Wi‑Fi (W) and Bluetooth (B) are mutually exclusive – a single turntable cannot have both. Choose based on your preferred wireless connectivity.
- Y (zero‑mark) and T (weight sensing) are premium features available exclusively on the UT500 series.
- Models without U, W, or B (e.g.,
MT200RL20ProV3) are remote‑only and do not support external programming or computer control.
Step 2: Clarify Your Core Requirements
Before diving into model numbers, answer these four fundamental questions:
1. What platter diameter do you need?
The diameter determines the maximum object footprint the turntable can support. Standard sizes range from 200 mm to 800 mm.
| Diameter | Typical Applications |
|---|---|
| 200 mm | Small products (jewelry, watches, cosmetics) |
| 320 mm | Medium items (shoes, small appliances) |
| 400 mm | General products (electronics, bags) |
| 500 mm | Larger objects (torso, industrial parts) |
| 800 mm | Full‑body or bulky equipment |
2. How much weight will the turntable carry?
ComXim offers load capacities from 20 kg to 300 kg. Two separate ratings apply:
- Step‑mode maximum load – ensures positioning accuracy in step/pendulum modes.
- Continuous‑mode maximum load – for steady rotation (typically higher than step‑mode).
Important: For longevity and accuracy, always operate at ≤80% of the rated load. If the object’s maximum dimension exceeds the platter diameter, recalculate effective load using the torque conservation formula (see the user manual for details).
3. Which control methods do you prefer?
ComXim supports multiple control pathways – choose based on your environment:
| Control Method | Model Indicator | Best For | Advantages |
|---|---|---|---|
| IR Remote | All models (R) | Out‑of‑box simplicity | No pairing, instant use |
| USB (COM) | U | PC control, development | Stable, cross‑platform programming |
| Wi‑Fi | W | PC + mobile phone control | No cables, TCP/IP programming, works with both Windows software and Android App |
| Bluetooth BLE | B | Mobile phone control (BLE‑optimized) | Low power, no pairing required, direct App connection |
Important Selection Rule: Wi‑Fi (W) and Bluetooth (B) cannot coexist in a single turntable. Choose based on your primary control device and workflow:
- Choose Wi‑Fi (W) if you need flexibility – it works with both PC (TurntableX / Web Console) and mobile phone (TurntablePlus App). Ideal if you switch between devices.
- Choose Bluetooth (B) if you primarily use a mobile phone and prefer BLE’s low‑power, quick‑connect experience. Works with TurntableBLE App on Android.
For Programming / SDK Development: You must choose a model with at least one of U, W, or B to enable external control. Models with remote control only (e.g.,
MT200RL20ProV3) do not support programming.
4. Do you need automated photography?
This is a standout feature of ComXim turntables:
- Control a DSLR/mirrorless camera → choose models with
S(wired shutter via 3.5mm jack) - Control a smartphone → choose models with
PS(Bluetooth wireless shutter pairing toComXimShutter) - No photography needed → any model without
SorPSworks fine
Step 3: Choose a Series Based on Application
MT Series – Versatile Workhorse
The broadest lineup, covering 200–800 mm diameters and loads from 20–300 kg. Ideal for product photography, 3D scanning, e‑commerce, and general display.
NT Series – Large‑Scale Solutions
Starting at 600 mm diameter, these handle oversized objects with ease.
UT500 Series – Premium Intelligence
Offers advanced features including hardware zero‑mark detection (Y) and built‑in weight sensing (T) – both exclusive to this series. Also available with Wi‑Fi, Bluetooth, and shutter options. Perfect for high‑precision scanning, quality control, and industrial automation.
Step 4: Follow the Decision Tree
Use this flowchart to filter options based on your must‑have features:
START
│
├─ Need computer control or programming?
│ ├─ Yes → Must have U (USB), W (Wi‑Fi), or B (Bluetooth)
│ └─ No → Remote‑only models are sufficient (R only)
│
├─ Need wireless control?
│ ├─ Yes → Choose either W (Wi‑Fi) or B (Bluetooth) – NOT both
│ │ ↓
│ │ └─ Wi‑Fi for PC → choose W
│ │ └─ Bluetooth for phone → choose B
│ └─ No → USB (U) is sufficient
│
├─ Need automated photography?
│ ├─ Yes → Look for S (camera) or PS (phone+camera)
│ └─ No → Skip shutter letters
│
├─ Need absolute positioning accuracy or weight sensing?
│ ├─ Yes → UT500 series only (Y for zero‑mark, T for weight)
│ └─ No → MT/NT series suffice
│
└─ Determine diameter + load → Final modelTypical Selection Examples
Scenario 1: E‑Commerce Product Photographer
Needs: Small appliances (~5 kg, <300 mm), Wi‑Fi control, DSLR shutter sync.
Recommended: MT320RUWPSL40ProV3
- MT320 – 320 mm diameter
- R – Remote
- U – USB (for programming if needed)
- W – Wi‑Fi
- PS – Phone + camera shutter
- L40 – 40 kg step‑mode load (well above 5 kg)
Scenario 2: 3D Scanning Developer (High Precision)
Needs: Human torso scanning (~60 kg, ~400 mm), USB for SDK development, absolute zero‑mark for positioning accuracy.
Recommended: UT500RUYL150ProV6
- UT500 – 500 mm, premium series
- R – Remote
- U – USB
- Y – Hardware zero‑mark (UT500 exclusive)
- L150 – 150 kg capacity
Scenario 3: Industrial Inspection with Weight Monitoring
Needs: Quality control station requiring weight measurement of each item, Bluetooth phone monitoring.
Recommended: UT500RUBTL150ProV6
- UT500 – Premium series
- R – Remote
- B – Bluetooth (phone control)
- T – Weight sensing (UT500 exclusive, ±0.25 kg accuracy)
- L150 – 150 kg capacity
Scenario 4: Budget‑Conscious Basic Display
Needs: Jewelry (~1 kg), remote control only, minimal cost, no programming required.
Recommended: MT200RL20ProV3
- MT200 – 200 mm
- R – Remote only (no U/W/B – not programmable)
- L20 – 20 kg capacity
- Best value for manual remote‑only operation
Quick Selection Summary Table
| Primary Need | Model Feature Indicators | Example Model | Programmable? | Control Options |
|---|---|---|---|---|
| Budget, remote‑only display | MT + diameter + RL + load | MT200RL20ProV3 | × No | IR Remote only |
| USB programming & control | U | MT320RUL40ProV3 | √ Yes | USB + IR Remote |
| Wi‑Fi (PC + Phone) | W | MT400RUWL60ProV3 | √Yes | Wi‑Fi + USB + IR Remote |
| Bluetooth (Phone‑centric) | B | MT500RUBL100ProV6 | √Yes | Bluetooth + USB + IR Remote |
| Camera shutter sync | S | MT350RUWSL60ProV3 | √Yes (with U/W/B) | Depends on base connectivity |
| Phone + camera shutter | PS | MT400RUWPSL100ProV6 | √Yes (with U/W/B) | Depends on base connectivity |
| High‑precision zero‑mark | Y (UT500 only) | UT500RUYL150ProV6 | √Yes (with U/W/B) | Depends on base connectivity |
| Weight sensing | T (UT500 only) | UT500RUBTL150ProV6 | √Yes (with U/W/B) | Depends on base connectivity |
| Full flagship features | UT500 + Y + T + PS | UT500RUWTPSYL150ProV6 | √Yes | Wi‑Fi + USB + IR Remote |
Frequently Asked Selection Questions
Q: What is the difference between ProV3 and ProV6?
A: They indicate hardware/firmware revisions. V6 includes the latest optimisations and features.
Q: What if my object is larger than the platter?
A: Effective load must be recalculated using torque conservation. For example, a 400 mm turntable carrying a 60 cm object reduces step‑mode capacity from 100 kg to ~53 kg. Choose a larger diameter if possible.
Q: Can I use Wi‑Fi to control the turntable from my phone?
A: Yes. Wi‑Fi models work with both Windows PC (TurntableX / Web Console) and Android phone (TurntablePlus App). Simply connect your phone to the turntable’s Wi‑Fi hotspot (password: 88889999), open the App, and control it wirelessly.
Q: What is the difference between Wi‑Fi and Bluetooth for mobile control?
A: Both work with mobile phones. Wi‑Fi offers broader device compatibility (PC + phone) and higher data throughput; Bluetooth offers lower power consumption and a simpler BLE connection experience.
Q: Can I use both Wi‑Fi and Bluetooth simultaneously?
A: No. Wi‑Fi (W) and Bluetooth (B) are mutually exclusive on the hardware level. Select one based on your primary control device.
Q: Which model should I choose for custom programming?
A: Any model containing U, W, or B supports the unified CT command set. Models without these letters (e.g., MT200RL20ProV3) are remote‑only and do not support programming.
Q: Does the UT500 series support Wi‑Fi and Bluetooth together?
A: No – the W/B mutual exclusivity applies to UT500 series as well. UT500 models come in either Wi‑Fi (W) or Bluetooth (B) variants.
Q: What features are exclusive to the UT500 series?
A: Y (hardware zero‑mark detection) and T (weight sensing, ±0.25 kg accuracy) are available only on UT500 series models.
Conclusion
Selecting the right ComXim turntable is a matter of decoding the model name, defining your core requirements, picking a suitable series, and applying the decision tree. With four steps, you can narrow down the perfect match from dozens of options.
Key Takeaways:
- Programming requires U, W, or B – remote‑only models cannot be programmed.
- Wi‑Fi and Bluetooth are mutually exclusive – choose one.
- Y (zero‑mark) and T (weight) are UT500‑exclusive premium features.
For further assistance, explore our technical documentation or contact our support team for personalised recommendations.
Additional Resources
| Resource | Link |
|---|---|
| Official Website | comxim.com |
| User Manual & Documentation | comxim.com/user-guide |
| Software & Apps | comxim.com/softwareapps-demo |
| USB Driver | comxim.com/download-usb-driver |
| Developer Tools | comxim.com/development-kit |
| Latest CT Command List | comxim.com/the-new-command-list |
| Video Tutorials | comxim.com/application-video-tutorial |
| Web Console | comxim.com/web-device-console |
Leave a Reply